ニュートリノPです @neutrinoP@vocalodon.net

Today's meal 🙏🙏🙏🙏🙏🙏

Me tomorrow 👴

Because GUMI: 「GUMIv6」 君に届くメロディ 「VOCALOID6」 https://nico.ms/sm41290979?ref=twitter #sm41290979 #ニコニコ動画

I'm grateful to God, grateful to mr. Murakami, grateful to GUMI . Thank you! 🙏🙏🙏「GUMIv6」Emerald and White 「VOCALOID6」 https://nico.ms/sm41334557?ref=twitter #sm41334557 #ニコニコ動画

Whenever I'm sharing a song of mine, the effect is the same: just like matter interacts with a neutrino, AKA zero interactions.
I seem to have upset the whole world by telling the truth 😅🤪

For those looking for getting the Edifier 2.0 R2850DB speakers.
Buy also two resistors of 8.2 Ohm 27 watts. Carefully remove the screws on the midrange drives and extract them, unsolder one wire from it, solder the resistor and the wire to the other end of the resistor. (series circuit).
This way the midrange will no longer scream so loud, you'll get very nice control of the treble if it needs boosted like I need, and the woofer stays at 0 (centre). Excellent sound!

Having to use the bass at 0 and the treble at max, still not enough brilliance compared to the vintage system. But that's because of my own damaged hearing. THe bass is there, it goes really low with my room's acoustics perceiving 31Hz without issues.
But no more phase cancellation, and the stereo field WHOAH! 🥰🥰🥰🤣

MNG 🥰🥰🥰🙏
They're here finally!
Excellent sound for monitoring the mix and mastering.

I watched this video. Now I understand why they are using such a long cable for the left side, with 5 pin connector, if the output is from a separate amp. https://www.youtube.com/watch?v=fsEnel79esg

THe rumor about Edifier is that they use separate amplification for each driver, using TAS5342LA for output, and the sound processor is TAS5508C , very highly rated as active components.

Right now I'm using my 43" monitor's audio, the sound feels so puny 🤣🤣🤣🤦‍♂️

What I'm ready for, to miss the deep bass my vintage setup was giving (18-40 Hz), and the strong treble coming from 6 tweeters. But if the 42-20000 Hz range is really there (although I am no longer hear above 12 kHz from the tumour and also age related hearing loss), the new system might be good enough to mix/master my next production.

Can't wait for them to arrive (Edifier 2.0 R2850DB-BK)

While waiting.... 🤣

I demolished the studio. No more huge wall of speakers. The new set has to arrive either tomorrow, or one of these days. considering the "black friday" craze, I expect delays in delivery.

The more I listen to GUMIv6, the more I love her 😊🥰 「GUMIv6」Emerald and White 「VOCALOID6」 https://www.nicovideo.jp/watch/sm41334557 🥰

Did my ECG and it's a relief to see that is in good condition.