ニュートリノさんのスピーカー、なんか良さそうw
@dj_beatmover 25 and 30 cm for VLF and LF
@neutrinoP このサイズくらいのPanasonicのスピーカーが置けたら良いんですが、私の部屋は狭いです
(´・ω・｀)
https://solcms.panasonic.biz/spec/sound/ramsa/cat107/at/index.html
@dj_beatmover Consider the size of the room, (4,5m/4,5m/3,2m my room) and chooser wisely: not the power matters, but the size! If is big, it will give enough air displacement to feel the bass even at 0.6W power as I use to obtain 78dB for audition.
@dj_beatmover Also, please allow me to tell you my personal taste (and I hope everybody sees this!)
I had Creative Studio monitors 5.1 and 7.1 too. They are no match to a heavy vintage PA on heavy large vintage speakers! And if you want surround, then use the same system for back in quad setup. That's all you need.
This is how I perceive very good sound....
@dj_beatmover Just imagine: this Romanian PA has a lot of hissing noise if is set to 100% power, I use it on the 1.5% power setting where the noise is barely audible. And this PA is all on transistors! No IC, no advanced technologies, is from 1979. And nothing more recent than this can give the sound I have with it.
@neutrinoP 私は過去に音響工事の仕事をしていましたが、
Panasonicのスピーカーは出力こそあるのですが、大音量でなくても音がよく抜けるので、
ボリュームを上げなくてもいい音質で聴けます。
8Ωのスピーカーなので、これは小さな部屋用ですね。
@dj_beatmover My setup has now two 8Ω speaker in series (16Ω per channel!) and the PA loves it. Smooth sound, round, and with the new 30cm drivers installed instead of the old stiff ones, I have deep bass from 24Hz!!!! It's amazing.
And when you think that the speakers are made in Poland... 😂 They are good!
@dj_beatmover Someone has thrown it to the trash. I picked it up, changed the capacitors, greased and cleaned the variable resistors, and cleaned a little the switches... and it works like new.
@dj_beatmover No matter what it takes and how much effort, I think is worth it to obtain "that sound". The sound that you can hear on its full scale, without being forced, and pleases you at best. Your production sound will improve significantly,
I was using, as I said, many other "beautifying sound systems" yes, they sounded good, but the source I was obtaining wasn't at least decent.
@dj_beatmover Vintage gears, with rough analogue sound are the best for mixing and mastering. That's what I feel, that's what I hear, and nobody will ever change my mind.
And I see, all the big studios having the classic, vintage gears to listen, huge speakers, not loud, and clean sound is obtained. 
@neutrinoP 私もやっと新曲が発表できました。私の曲は殆どがEurobeatのように仕上げております。ぜひお聞きください。
@dj_beatmover If I rise the power to 2x3W I can't stay in the room anymore, is too loud!
Is more important to have power to spare (just in case you want to annoy some neighbours) but in daily usage, very low power, and (this is very important!) no forced frequencies on small speakers! Everything must flow freely from at least as low as 30Hz to as high as you can perceive (me.. 12kHz most haha)